Argox PA-20 Basic Programming Manual - Manual (Page 105)

PT-Basic Programming Manual Ver. 1.00 104/143
3.21 Simulator (Only for PC simulator) commands
COPYFILETOPDT
Purpose： To copy a file from PC side to PDT.
Syntax： COPYFILETOPDT(PCPath$ , PDTPath$)
Example： COPYFILETOPDT("D:\Code\BASIC\5.BMP","D:\PROGRAM\5.
BMP")
Description： The COPYFILETOPDT command copies the PC file path specified
by PCPath$ to the simulator path specified by PDTPath$.
BACKUPDATAFILETOPC
Purpose： To backup a file from PDT to PC.
Syntax： BACKUPDATAFILETOPC(PDTPath$ , PCPath$)
Example： BACKUPDATAFILETOPC("D:\PROGRAM\5.BMP","d:\test.bmp
")
Description： The BACKUPDATAFILETOPC command copies the simulator
datafile path specified by PDTPath$ to the PCPath$ in PC and
stored in PC with the same file name.
SIM_SETSCANNERTYPE
Purpose： To setting scan module type.
Syntax： SIM_SETSCANNERTYPE(N%)
Example： SIM_SETSCANNERTYPE(1)
Description： N% is an integer variable indicating the scan module type.
N% Meaning
0 CCD module
1 Laser module