Argox PA-20 Basic Programming Manual - Manual (Page 116)

PT-Basic Programming Manual Ver. 1.00 115/143
A19. Bluetooth commands
Command description
BT_START Bluetooth module power enable.
BT_STOP Bluetooth module power disable.
BT_OPEN Bluetooth connect.
BT_CLOSE Bluetooth disconnect.
BT_WRITE Write characters to Bluetooth module.
BT_READ$ Read characters from Bluetooth module.
BT_GETLOCALINFO$ Get Bluetooth information.
BT_SETLOCALSET Set Bluetooth information.
BT_INQUIRY Inquiry other Bluetooth module for PT-20B to
connect.
BT_GETDEVICEINFO To get other bluetooth device information
after the search.
BT_DISCONNECTALERT For bluetooth disconnect alert.
GET_BT_ERROR To get the bluetooth error code.
A20. USB commands
Command description
USB_OPEN To initialize and enable USB port.
USB_CLOSE To close the USB port.
USB_READ$ To read specific number of bytes from USB
port.
USB_WRITE To write specific number of bytes to the PC
side.
A21. Simulator (Only for PC simulator) commands
Command description
COPYFILETOPDT To copy a file from PC side to PDT.
BACKUPDATAFILETOPC To backup a file from PDT to PC.
SIM_SETSCANNERTYPE To setting scan module type.