Argox PA-20 Basic Programming Manual - Manual (Page 63)

PT-Basic Programming Manual Ver. 1.00 62/143
SCANKEYPWON
Purpose： To set power on by scan key.
Syntax： A%=SCANKEYPWON(N%)
Example： Result%=SCANKEYPWON(1)
Description： N% Meaning
0 Normal
1 Set power on by scan key
A% is an integer variable to be assigned to the result.
A% Meaning
0 Setting fail
1 Setting success
GET_SCANKEYPWON
Purpose： Get state for power on by scan key.
Syntax： A%= GET_SCANKEYPWON
Example： Result%= GET_SCANKEYPWON
Description： A% is an integer variable to be assigned to the result.
A% Meaning
0 Normal
1 Set power on by scan key