3 2u series, 4 rack installation, 2u series – AGI Security SYS-HC0851S2 User Manual

Page 56: Rack installation

cable.

connect the HDD and the SATA

port

Close the chassis and fix the

screws to secure firmly.

3.3.3 2U series

This series DVR max supports 8 SATA HDDs. Please use HDD of 7200rpm or higher.

①Loosen the screws of the upper cover

and side pane

②

Remove the HDD upper bracket

③

Now you can see the bottom

bracket

④

Line up the HDD to the four holes of

the HDD bracket.

⑤

Fix the HDD firmly.

⑥

Install the upper bracket and

then Use screws to fix HDD in the

bracket.

⑦

Put the co ver in accordance with the

clip and then place the upper cover

back.

⑧

Secure the screws in the rear panel

and the side panel.

Important:

If the HDD amount is less than four, you do not need to install the HDD bracket.

When there is a bracket, please make sure the installation direction of HDDs is the same.

3.3.4 Rack Installation

1. Loosen the screws of the

upper cover.

This manual is related to the following products: