AGI Security SYS-HC0851S2 - Manual (Page 146)

137
record video.
Note
About redundancy setup:
 If current channel is not recording, current setup gets activated when the channel
begin recording the next time.
 If current channel is recording now, current setup will get activated r ight away, the
current file will be packet and for m a file, then system begins recording as you have
just set.
After all the setups please click save button, system goes back to the previous menu.
Playback or search in the redundant disk.
There are two wa ys for you to playback or search in the redundant disk.
 Set redundant disk(s) as read-only disk or read-write disk (Main
menu->Setting->Storage- >HDD Manager)). System needs to reboot to get setup
activated. Now you can search or playback file in redundant disk.
 Dismantle the disk and play it in another PC.
4.10.4.1.2 Snapshot
4.10.4.1.2.1 Schedule Snaps hot
 On the preview interface, right click mouse and then select Manual->Record, or in the
main menu, from Setting->Storage->Record, check the box to enable snapshot
function of corresponding channels. See Figure 4-105.
 In main menu, from Setting->Camera->Encode->Snapshot interface, here you can
input snapshot mode as regular, size, quality and frequency. See Figure 4-106.
 In main menu, from Setting->Camera->Encode->Schedule interface, please enable
snapshot function. See interface on the right of Figure 4-107.
Please refer to the following figure for detailed infor mation.
Figure 4-105