AGI Security SYS-HC0851S2 - Manual (Page 150)

141
you have enabled these two types at the same time, system can activate the activation
snapshot when alar m occurs, and other wise system just operates the schedule
snapshot.
4.10.4.1.2.4 Image FTP
In the main menu, from Setting->Networ k->FTP, you can set FTP server infor mation.
Please enable FT P function and then click save button. See Figure 4-111.
Please boot up corresponding FTP ser ver.
Please enable schedule snapshot ( Chapter 4.10.4.1.2.1) or activation snapshot
(Chapter 4.10.4.1.2.2) first, now system can upload the image file to the FT P server .
Figure 4-111
4.10.4.2 HDD Manager
Here is for you to view and implement hard disk management. See F igure 4-112.
You can see current HDD type, status, capacity and etc. The operation includes for mat
HDD, and change HDD property (read and wr ite/read-only/redundancy).
Please input the
corresponding information
here, if you just upload the
image FTP.