4 alarm output, 4 storage, 1 schedule – AGI Security SYS-HC0851S2 User Manual
Page 142: 1 record, Storage
133
4.10.3.4 Alarm Output
Here is for you to set proper alarm output such as schedule, manual.
Please highlight icon
to select the corresponding alar m output.
After all the setups please click OK button, system goes back to the previous menu. See
Figure 4-98
4.10.4 Storage
4.10.4.1 Schedule
4.10.4.1.1 Record
Note:
You need to have proper r ights to implement the following operations. Please make
sure the HDDs have been properly installed.
After the system booted up, it is in default 24-hour regular mode. You can set record type
and time in schedule interface.
In the main menu, from Setting->Storage->Schedule, you can go to schedule menu.
Please note you need to go to main menu->Setting->System- >General->Holiday to
set holiday date first, otherwise, there is no holiday setup item.
Channel: Please select the channel number first. You can select “all” if you want to
set for the whole channels.
: Sync connection icon. Select icon
of several dates, all checked items
can be edited together. Now the icon is shown as
.