AGI Security SYS-HC0851S2 - Manual (Page 55)

46
and side pane just three rounds). with the four holes in the bottom.
④
Turn the device upside down and
then turn the screws in firmly.
⑤
Fix the HDD firmly.
⑥
Connect the HDD cable and
power cable.
⑦
Put the co ver in accordance with the
clip and then place the upper cover
back.
⑧
Secure the screws in the rear panel
and the side panel.
3.3.2 1.5U series
This series DVR max has four SATA HDDs. Please use HDD of 7200rpm or higher.
○
1 Loosen the screws of the
upper cover.
○
2 Line up the HDD to the four
holes of the HDD bracket.
○
3 Use four screws to fix HDD.
○
4 Unfasten the HDD power
○
5 Use the special data cable to
○
6 Insert the HDD power cable.