AGI Security SYS-HC0851S2 - Manual (Page 151)

142
Figure 4-112
4.10.4.3 Record
4.10.4.3.1 Record Control
Note:
You need to have proper r ights to implement the following operations. Please make
sure the HDD has been proper ly installed.
There are three ways for you to go to manual record menu.
 Right click mouse and then select Manual->Record.
 In the main menu, from Setting->Storage->Record.
 In live viewing mode, click record button in the front panel or record button in the
remote control.
System supports main stream and sub stream. There are three statuses:
schedule/manual/stop. See Figure 4-113. Please highlight icon “ ○ ” to select
corresponding channel.
 Manual: The highest priority. After manual setup, all selected channels will begin
ordinary recording.
 Schedule: Channel records as you have set in recording setup ( Main
Menu->Setting->System->>Schedule)
 Stop: Current channel stops recording.
 All: Check All button after the corresponding status to enable/disable all-channel
schedule/manual record or enable/disable all channels to stop record.