AGI Security SYS-HC0851S2 - Manual (Page 127)

118
in the mapping port number. The device ID here shall be the same with the ID you input in
Figure 4-78. Click Add button to complete the setup.
4) Now you can boot up the proxy server. When you see the network status is Y, it means
your registration is OK. You can view the proxy server when the device is online.
Important
The server IP address can also be domain. But you need to register a domain name
before you run proxy device server.
4.10.2.14 Alarm Centre
This interface is reserved for you to develop. See Figure 4-79.
Figure 4-79
4.10.2.15 P2P
The P2P interface is shown as in Figure 4-80.
You can visit www.easy4ip.com to scan the QR code to login.