Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual User Manual
Page 25

AES
Audio 1 = 0
Audio 2 = 1
Mode
specifies if the mediaHub HD Pro is
encoding audio or passing it through as
received
Off
Encode
Passthrough
See AMO in API Only
Type
type of audio signal being encoded or
passed
Dolby Digital AC3
Musicam Layer II
Dolby E
Linear PCM (LP)
See AMO in API Only
Bitrate
audio codec
64000-384000 kBits/sec (Musicam
encode)
64000-640000 kbits/sec (Dolby
Digital/passthrough)
See AMO in API Only
Volume Level
volume in dB
user-defined using
range is -18 dBs to 8 dBs in
increments of 1
*.ECMD ALV
[channel] [level in dB]
Audio Channel 1 = 0
Audio Channel 2 = 1
Note: the Adtec mediaHUB-HD Pro encoder function does not support MPEG1 Layer 3 or MP3.
www.adtecdigital.com
This manual is related to the following products: