Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual - Manual (Page 13)

Off: not decoding
Green: decoding
Control Off: not implemented
Alarm
Off: no alarm
Red: decoder alarm
System LED Status
Power
Green: Power is on.
Off: Power is off
Alarm
Off: no alarm
Yellow: minor alarm
Red: major alarm
Link
Off: no link detected
Green: link active
Busy
Off: no traffic
Green Flashing: traffic
HD
Green: High Def Feaure is enabled.
Off: High Def Feature is disabled.
Front Panel Navigation
The mediaHUB-HD Pro has an LCD display on the front panel. Using the Mode, Select, Enter, Escape buttons and
directional buttons, you can navigate the front panel menu and control the unit.
The mediaHub-HD Pro is always logged in on startup •
If the device has logged out due to accident or a login duration timer being set (see below), you will need to log back
in. •
To log in from a logged-out status:
Step Action
1 Press 2Press <Up> arrow 3 Press <Select>4 Press <Enter>5 Press <Right arrow>6 Press The front panel also has a login duration capability. This setting allows you to specify a time frame in which the unit will
automatically log itself out if it receives no control inputs via the front panel or API session.To set the duration:StepAction1Press mode until you see the System Menu.2Press
2 Press < U p> arrow
3 Press < S elect>
4 Press < E nter>
5 Press < R ight arrow>
6 Press
The front panel also has a login duration capability. This setting allows you to specify a time frame in which the unit will
automatically log itself out if it receives no control inputs via the front panel or API session.
To set the duration:
Step Action
1 Press mode until you see the System Menu.
2 Press
3 Press the arrow
4 Press 5Using the and arrows, select the value you wish.6Press to save your selectionPossible Values:
0 (Zero): The unit will not auto-log-out 1-9: The number of minutes until log out if no input is received.This snapshot tells you the current encode variables as shown in this diagram:.www.adtecdigital.com Pages: 1 … 11 12 13 14 15 … 98 wrong Brand wrong Model non readable This manual is related to the following products: edje-5110 (version 01.02.05) Manual See also other documents in the category Adtec digital Video: DPI-1200 (version 01.04.08U) Quick Start (2 pages) DPI-1200 (version 01.04.08U) Manual (58 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (67 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (68 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) EN-80 (version 2.02.28) Quick Start (2 pages) EN-30 (version 1.02.02) Manual (59 pages) RD-30 (version 2.1.1) Quick Start (1 page) RD-30 (version 2.1.1) Manual (39 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start (2 pages) YUV2QAM (version 01.02.01) Manual (46 pages) Soloist-HD Pro (version 02.07.09) Manual (77 pages) EN-91 / EN-91P (version 1.02.29) Quick Start (2 pages) DTA-3050 (version 6.02.14) Manual (94 pages) EN-20 (version 2.03.06) Manual (63 pages) mediaHUB-HD Pro (version 03.07.19) Studio Encoder Quick Start (2 pages) RD-60 (version 1.13.02) Quick Start (2 pages) eyeMonitor (42 pages) TBGS w/adManage (50 pages) Soloist 4111 (version 02.07.03) (1 page) EN-40 (version 2.02.24) (2 pages) mediaHUB (version 02.00.13) (24 pages) edje-5110 (version 01.02.05) Quick Start (2 pages) MAS & iptvManage (44 pages) AVS2 (5 pages) mediaHUB-HD 422 (version 1.01.10_M_2) Manual (104 pages) Sitemap
5 Using the and arrows, select the value you wish.
6 Press to save your selection
Possible Values:
0 (Zero): The unit will not auto-log-out 1-9: The number of minutes until log out if no input is received.
This snapshot tells you the current encode variables as shown in this diagram:.
www.adtecdigital.com