Front panel, Front panel diagram – Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual User Manual
Page 12
Front Panel Illustration
The mediaHUB-HD should be installed into a one-rack unit 19” rack slot. Power should be applied to the unit and configured
with a valid IP address via the front panel. Once the IP is configured, you can use Telnet or a web browser to configure and
control the unit.
Encoder
LED Status
Encode
Off: not encoding
Green flash:
pre-roll
Green:
encoding
Yellow:
transition from encode to idle
Red:
no video
Video
Off: no video/not enabled (audio only )
Green:
video present
Yellow:
wrong format
Red:
no video present
Resolution
Green:
1080i HD
Yellow:
720p HD
Off: Standard Def.
Audio 1 & 2
Off: no audio present
Green:
audio present
Control
Off: mode not enabled
Green:
Control Detected/Remote Mode
Yellow:
Control Detected/Local Mode
Red:
Control not responding.
Alarm
Off: no Encoder alarm
Red:
Encoder alarm
Decoder
LED Status
Decode
Off: not decoding
Green flash:
pre-roll
Green:
decoding
Video
Off: no video (audio only)
Green:
decoding video
Yellow:
decode errors
Red:
decoder fail
Resolution
Green:
1080i HD, Yellow: 720p HD, Off: Standard Def.
Audio 1 & 2
www.adtecdigital.com