Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual - Manual (Page 21)

Enable or disable the DVB_ASI input port. If receive mode is enabled,
and a valid DVB-ASI signal is detected, the unit will play the stream. Off (disabled)
On (enabled)
Audio Track identifies associated audio
Track 1
Track 2
*.ECMD API
Audio Matrix
per SMPTE 272/299M SDI supports embedded audio Groups 1, 2, 3,
4.
*.ECMD SMX
NTSC 1080P60* VESA800X600X75 VESA1280X768X85
NTSC-J VESA640X350X85 VESA800X600X85 VESA1280X960X60
PAL VESA640X400X85 VESA848X480X60 VESA1280X960X85
PAL-M VESA640X480X60 VESA1024X768X43 VESA1280X1024X60
720P24 VESA640X480X72 VESA1024X768X60 VESA1280X1024X75
720P50 VESA640X480X75 VESA1024X768X70 VESA1280X1024X85
720P60 VESA640X480X85 VESA1024X768X75 VESA1360X768X60
1080P24 VESA720X400X60 VESA1024X768X85 VESA1400X1050X60
1080I50 VESA800X600X56 VESA1152X864X75 VESA1400X1050X75
1080P50 VESA800X600X60 VESA1280X768X60 VESA1600X1200X60
1080I60 VESA800X600X72 VESA1280X768X75 VESA1920X1200X60
XGA1080i50 XGA1080i60 720P59 1080i59
* The mediaHUB-HD Pro's Decoder module only supports this display target for HDMI output. It does not actually decode
1080P60, but will scale and/or de-interlace its decoded video to produce 1080P60 for output on HDMI.
Note on VESA Resolutions: Rev. B Units do not support VESA resolutions due to loss of DVI connector. NTSC, PAL,
720P59, and 1080i59 are recommended resolutions. Composite and SDI are active during all display targets. HDMI is not
active at SD resolutions.
www.adtecdigital.com