Xtramus NuTAP-S61 V1.2 - Manual (Page 9)

9
2. NuTAP-S61 Application Example & Hardware Installation
2.1. Hardware Installation for Network Tapping
As the example shown in the figure above, NuTAP-S61 allows you to perform network tapping. You can
monitor/filter packets that meet the criteria by:
•
Connecting NuTAP-S61’s Console Port to a PC with NuSet-MiniTAP installed via a RJ45-to-USB
cable.
• Connecting NuTAP-S61’s Monitor Port (M0 or M1, depending on your settings) to a PC with other
network TAP software installed via an RJ45 cable.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®