Xtramus NuTAP-S61 V1.2 - Manual (Page 59)

59
3.5.2. Capture Criteria
With Capture Criteria, transmitted packets from NuTAP-S61/NuTAP-311’s Network Port A0 to A1 (or
the other way around) that meet the criteria set in Capture Criteria will be captured and stored in
NuTAP-S61’s buffer memory. All packets captured and stored this way can be accessed via any Monito
Port upon user reques
r
ts.
A. Capture Criteria – Protocol
Protocol – Capture All Packets
Click the C
ackets check box to ca s. apture All P pture all packet
Protocol – MAC
Broadcast Multicast Unicast
VLAN QinQ (Dou AN TAG) CR or ble VL C Err
Protocol – Ne twork
ARP IPv4 IPv6
ICMP IPCS Error Pattern C heck
Protocol – Protocol
TCP UDP FTP RTP
Protocol – Button
Apply: Apply and save the changes you’ve made on this page. After making any settings
on this page, you must click the Apply button or all changes will be lost.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®