Xtramus NuTAP-S61 V1.2 - Manual (Page 55)

55
3.5. Network Port Setting
You can configure filtering/capture criteria and pattern check for Network Port A0/A1 in the Port Config –
Network Port screen. There are two ways to access Port Config – Network Port:
Accessing Port Config – Network Port
•
Click Network Port A0/A1 located on Config
in the Menu Bar.
•
Click the Network Port A0/A1 button located
on Quick Launch Buttons.
NuSet-MiniTAP’s Network Port settings include Forwarding Filter, Capture Criteria, Re-direct Filter,
and Pattern Check. Please see the sections down below for detail descriptions.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®