Xtramus NuTAP-S61 V1.2 - Manual (Page 64)

64
B. Re-Direct Filter – SDFR
SDFR
SDFR (Self-Discover Filtering Rules) is a technology that makes packet capturing/filtering over Ethernet
d convenient. Each filter is independent and can be activated in any combinations. easy an
SDFR – Choosing SDFR Parameters
Y can choose the criteria with the check boxes. The SDFR parameters available here includes: ou
¾ DA: Destination MAC Address
¾ SA: Source MAC Address
¾ VID: VLAN ID ¾ DIP: Destination IP Address
¾ SIP: Source IP Address
¾ DPort: Destination Port
¾ SPort: Source Port
As mentioned above, each parameter is independent and can be activated in any combinations of DA, SA,
VID, SIP, DIP, SPort, DPort, DA & SA, DA & SA & VID, DA & SIP, DA & DIP, SA & SIP, SA & DIP, SIP &
DIP, SIP & SPort, SIP & DPort, DIP & SPort, DIP & DPort, SIP & DIP & SPort, SIP & DIP & DPort, SIP
& DIP & SPort & DPort, VID & SIP & DIP & SPort & DPort, DA & SA & SIP &DIP, DA & SA & SIP & DIP
& SPort & DPort, and DA & SA & VID & SIP & DIP & SPort & DPort.
SDFR – Rule Setting
The Rule Setting field allows you to set and input the value of DA, SA, VID, DIP, SIP, DPort and SPort.
The value of SDFR parameters can be set as Single, Pair, and Range. The following descriptions will us
DA as example.
Single: A single value will be used as SDFR
parameter.
Pair: Two values will be used as SDFR
parameters.
Range: Values within the range of the two values
set here will be used as SDFR parameters.
SDFR – Current Filter/Technical Terms
The Current Filter field displays the settings you’ve made, while the Technical Terms field displays the
explanations for DA, SA, VID, DIP, SIP, DPort, and SPort.
SDFR – Button
Apply: Apply and save the changes you’ve made on this page. After making any
settings on this page, you must click the Apply button or all changes will be lost.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®