WaveWare SPS-5 v9E - Manual (Page 24)

Fig. 19 (Click on “Files” and then Click “Save As” and name your file)
Recommendation
After “ Reading ” the System for the First Time and Before you Edit the Configuration : “Save the Database”.
You could name it “Default” or “Base” or a name of your preference.
This would give you a “Base Configuration” to fall back on in case you ever need the “Original” Database and Settings.
After making your changes and you have “Programmed” the New Information into the Database, “Save” your completed
work as a Different name, (maybe for that particular job location as shown in the examples above).
You may have another Install that would be very similar to this one and you could simply “Download the Saved File” to
the New Paging System (Make Sure that you “ Match ” the System Models).
Test the Encoder with Pagers
On the Main Screen of Encoder Setup Program, Click on the “Test Encoder” Icon to send a test message.
See Fig. 20
Fig. 20 (Open the Test Encoder Screen)
Test Encoder Screen
In this screen you can Test your Pagers, Create and Archive Messages, View Com Port Logging, save the Logs to a File.
See Fig. 21