WaveWare SPS-5 v9E - Manual (Page 15)

Encoder Setup Software Programming Guide
Getting Started
Insert the “Product Support CD” into a Laptop or Desktop.
Install the Encoder Setup v 9 Program Software.
The v 9 Encoder Software has the ability to work with all Versions of the v9 Paging Systems, including V9, V9S, and V9E.
Attach the paging system using the supplied Standard RS-232 serial cable to your selected Com Port.
The SPS-5 v 9 or the v 9 S will be Auto-Detected by the Encoder Setup Software, when you “ Open ” the Com Port.
Encoder Software Main Screen – Setup the Com Port to be used
Start the SPS-5 v 9 Encoder Setup Program and Click on the “Com Port” Button in the Menu and Click on “Properties”.
See Fig. 1
Fig. 1 (Choose the Com Port, Part 1 ) If the Com Port Number is Wrong , Click “Properties” to Choose Port.
Com Port Settings Screen
Edit the “Com Port” and Settings and Click “OK”.
See Fig. 2
Fig. 2 (Choose the Com Port, Part 2 )
Encoder Software Main Screen – Open Com Port
On the Main Screen of Encoder Setup Program, Click on the “Open Com (X)” Button next to the RED Light.