beautypg.com

KBC Networks WES2HT User Manual

Page 45

background image

WES2HT User Manual

Manual-WES2HT-Rev1407-1

Copyright © KBC Networks 2013

Page 44 of 142

www.kbcnetworks.com

Step 11:

Enter the MAC address of the Client unit that the Host will connect to in
the ‘Remote Client-Lock to MAC’. This can be found on the ‘Status’ page of
the Client unit or on the rear label on the outside of the unit. The MAC
address must be entered in the following format: xx:xx:xx:xx:xx:xx.


Step 12:

Apply Settings

Enter the Client MAC

address here

Select: