KBC Networks WES2HT User Manual

Page 34

Text mode
Original mode

WES2HT User Manual

Manual-WES2HT-Rev1407-1

Page 33 of 142

www.kbcnetworks.com

Step 8:

Enter the MAC address of the Client unit that the Host will connect to in
the ‘Remote Client-Lock to MAC’. This can be found on the ‘Status’ page of
the Client unit or the rear label on the outside of the unit. The MAC
address must be entered in the following format: xx:xx:xx:xx:xx:xx.

Step 9:

Apply Settings

Step 10:

Save the changes.

Enter the Client MAC

address here

Select:

Select: