KBC Networks WES2HT - Manual (Page 102)

WES2HT User Manual
Manual-WES2HT-Rev1407-1
Copyright © KBC Networks 2013 Page 101 of 142 www.kbcnetworks.com
11.2.1.2 Status: MAIN
The ‘MAIN’ section shows the Uptime, the Host Name and System Time information.
Uptime:
This shows the number of hours and minutes since the last reboot or when
the system was initially powered up.
Host Name: This displays the chosen name of the device as set in the ‘SYSTEM’ menu.
System Time: This is the internal clock of the device. This is not the actual time but is
used for the scheduled reboot function found in the ‘SYSTEM’ page.
11.2.1.3 Status: VERSION
The ‘VERSION’ section shows the Firmware Version information.
Firmware Version: This is the firmware version loaded onto the WES2HT unit.
11.2.1.4 Status: LAN SETTING
The ‘LAN SETTING’ section shows the LAN MAC, Mode, IP Address, Gateway IP Address
and LAN cable information. These are set in the ‘Basic Network’ menu option see Section
11.2.6.
The Host/AP default configuration is:
WES2HT-AC-
CA_V230