KBC Networks WES2HT - Manual (Page 20)

WES2HT User Manual
Manual-WES2HT-Rev1407-1
Copyright © KBC Networks 2013 Page 19 of 142 www.kbcnetworks.com
2.5 Mixed systems – WES2HT & MESH2HT (or MESHII)
In many wireless designs there are multiple transmitters sending to one common
receiver. Often the amount of throughput coming into the transmitter is less than
99Mbps so the standard WESII series could be used on the transmit side. On the receive
side, however, the overall throughput coming into the receiver may exceed 99Mbps and
therefore need the HT multipoint host. In the drawing below, assume that the camera
icon represents numerous cameras and/or high megapixel but the total amount of
throughput at each transmit site will never exceed 99Mbps. The diagram also assumes
that the amount of throughput at the receive Host site is more than 99Mbps but less
than 230Mbps.
Note: Switch at the Host receive side must be gigabit (POE optional)
WES2HT MP Host