Digital Tigers SideCar MMS Series - Manual (Page 30)

26- W INDOWS XP/2000 DRIVER INSTALLATION
Stages 3 - 4: Install SideCar MMS display controllers and monitors
Next, Windows should detect the first SideCar MMS display controller and alert you with a
“Found New Hardware Wizard.”
Note: The SideCar MMS series contains multiple display controllers. These can be installed in
succession without restarting your computer. The procedure is the same for each controller and
attached monitor.
ƒ Windows XP: Follow the sequence below.
ƒ Windows 2000: Skip ahead four pages to the Windows 2000 section.
Windows XP / Stage 3: Install display drivers
1. After installing the PCI to PCI
bridge (previous section),
Windows XP will open this alert:
Click the option
“Install from a
list or specific location
(Advanced)”
— then click
“Next.”
2. The dialog box reports:
Ensure that
“Search for the best
driver in these locations” is
selected, along with “Search
removable media (floppy, CD-
ROM...)”
— then click “Next.”