Digital Tigers SideCar MMS Series - Manual (Page 24)

20- W INDOWS XP/2000 DRIVER INSTALLATION
Stage 1. Install PCI to PCI bridge
During various stages of the installation, Windows will detect one or more devices called a “PCI
to PCI bridge.” Such as: “DEC 21152 PCI to PCI bridge” or “PCI standard PCI to PCI bridge.”
PCI bridges are part of the logical connection between your notebook and the SideCar. They are
industry-standard and are supported automatically by Windows XP/2000 once you follow the
installation wizard.
Always accept automatic installation of these bridges . Simply follow the prompts according to
your operating system (illustrated below) and restart your system when prompted.
Windows XP / Stage 1: Install PCI to PCI Bridge
Leave the default option selected: “Install the software automatically” — click “Next” and finally
“Finish” at the confirmation screen. (Two versions of the Windows XP wizard are shown.)
Now skip ahead three pages (past the Windows 2000 PCI to PCI Bridge section) to install your
SideCar MMS display controllers and attached monitors.