Digital Tigers SideCar MMS Series - Manual (Page 19)

15– S UPPORTED DISPLAY CONFIGURATIONS
Supported display combinations
The SideCar MMS series supports any combination of digital DVI or analog VGA
connections.
ƒ A high-density LFH connector at the rear of the SideCar provides the display outputs.
(Two such connectors are supplied with the SideCar PlusFour MMS.)
ƒ A supplied
Y-cable attaches to the LFH connector, supporting two displays
per Y-cable.
ƒ Each Y-cable has two
DVI-I connectors to directly support
either DVI-D or DVI-I cables supplied with your display.
ƒ If your display has only a VGA cable, use the
supplied DVI-to-VGA adapters to convert the
DVI ends of the Y-cable to support VGA
connections.
Y-cable with dual DVI-I connectors
TV output is not supported by the SideCar MMS series except when the SideCar is attached via
a PCI interface to a desktop PC or notebook docking station.
Supported display combinations per Y-cable splitter include:
ƒ Up to two digital DVI displays (up to 1280 by 1024 resolution each)
ƒ Up to two analog VGA displays (up to 2048 by 1536 resolution each), using the supplied
VGA adapters attached to the Y-cable
ƒ A combination of one DVI display and one VGA display (using the DVI-to-VGA
adapter)
For complete display compatibility information, please see the Specifications section at the back
of this manual.