Help, Options / save options – Dataman 48Pro User Manual
Page 81
Software
To switch program from Protected mode to normal mode, use
the menu command Options / Normal mode. The ”Password
required" dialog appears. User has to enter the same
password as the password entered during switch to Protected
mode.
Other way to cancel Protected mode of program is closing of
program, because program Protected mode is active until
program is closed. The next program start will be to Normal
(standard) mode (the only exception is case of project loaded
by command line parameter name of project and the project
was saved in Protected mode).
Options / Save options
This command saves all settings that are currently supported
for saving, even if auto-save is turned off. Following options
are saved: options under the Options menu, ten last selected
devices, file history, main program window position and size.
Help
Pressing the
selecting menu item and press
sensitive help. If PG4UW is executing an operation with the
programmer
The following Help items are highlighted:
• words describing the keys referred to by the current Help
• all other significant words
• current cross-references; click on this cross-reference to
obtain further information.
Since the Help system is continuously updated together
with the control program, it may contain information not
included in this manual.
Detailed information on individual menu commands can be
found in the integrated on-line Help.
Note: Information provided in this manual is intended to be
accurate at the moment of release, but we continuously
improve all our products. Please consult manual on
.
81