File / save, File / load project – Dataman 48Pro User Manual
Page 40
the hexadecimal number 4F52 would be stored starting at
storage address 1000H as: 4FH is stored at address 1000H,
and 52H will be at address 1001H. In a little-endian system, it
would be stored as 52H at address 1000H, and 4FH at address
1001H.
Number 4F52H is stored in memory:
Address Big endian Little endian
system system
1000H 4FH 52H
1001H 52H 4FH
The reserved key
and any time.
File / Save
This command saves data in the buffer, which has been
created, modified, or read from a device onto a specified file.
The file format of saved file can be chosen from supported
formats list box. The Buffer start and Buffer end addresses can
also be specified, selecting the part of the buffer to save to the
file. Supported file formats now are binary, MOTOROLA, MOS
Technology, Tektronix, Intel (extended) HEX, ASCII space,
JEDEC and POF.
If the checkbox Swap bytes is displayed, the user can activate
the function of swapping bytes within 16bit words (or 2-byte
words) during writing to file. This feature is useful especially
when saving files with Motorola representation of byte order in
file (big endian). Standard save file operation is using little
endian byte order.
The reserved key
and any time.
File / Load project
This option is used for loading the project file, which contains
device configuration buffer data saved and user interface
configuration.
The standard dialog Load project contains additional window
- Project description - placed at the bottom of dialog. This
window is for displaying information about the currently
selected project file.
Project information consists of:
• manufacturer and name of the first device selected in the
project
• date and time of project creation
40