Dataman 48Pro - Manual (Page 77)

Software
copy Log window content to clipboard. The Log window
content can be placed from clipboard to any text editor.
Diagnostic reports are useful when error occurs and have to be
documented. Diagnostic reports are useful when
communicating with programmer or device manufacturers.
Options
The Options menu contains commands that let you view and
change various default settings.
Options / General options
General options dialog allows users to control following
program options:
File options
File options page allows you to set file masks, auto-reload of
current file and choose file format.
File format mask is used for setting file-name masks to act as
a filter for file listings in the File / Save and File / Load
window. Masks may contain one of following wildcards (*, ?) .
Project file default extension is used for setting project file
extension used as default in File / Load project and File /
Save project dialog boxes.
If the current file is modified by another process, three
options exist for reloading the actual file:
1. Prompt before reloading file
2. Reload
automatically
3. Ignore change scanning of current file
There are three situations when file modification is tested:
• switching to the control program from another
application
• selecting the device operation Verify or Program
• when repeat of last device operation is selected in
dialog "Repeat?"
Load file format allows setting the file format recognition
mode. When automatic file format is selected, program
determines the format automatically. If file format matches one
of supported formats, the file is read to buffer in the detected
format.
Manual file format allows the user to select explicitly the file
format. The file may be loaded incorrectly, if the file format
does not match the user selected format.
Hex file options
This page contains several options for loading control by any
of HEX formats.
77