Dataman 48Pro - Manual (Page 55)

Software
Actual serialization settings for actually selected device are
saving to disk along with associated device by File / Exit and
save command.
When incremental mode is active following actual settings are
saved to configuration file: address, size, serial value,
incremental step and settings of modes ASCII / BIN, DEC /
HEX, LS byte / MS Byte first.
When from-file mode is active following actual settings are
saved to configuration file: name of input serialization file and
actual label, which indicates the line with actual serial number
in input file.
When program is in multiprogramming mode (multiple socket
programmer is actually selected) the special section - Action
on not programmed serial values due to error - is displayed
in dialog Serialization. In this section two choices are
available:
1. Ignore not programmed serial values
2. Add not programmed serial values to file
Ignore not programmed serial values means the not
programmed serial values are ignored and no action is done
with them.
Add not programmed serial values to file means the not
programmed serial values are added to file. The file of not
programmed serial values has the same text format as
serialization file for ”From-file” serialization mode. So there is
possible to program the serial values later on by ”From-file”
serialization mode.
If device programming is stopped by user, program will not
change the serial values ready for next batch of devices. The
same situation is if device program is incomplete, e.g. for
device insertion test error.
Ignoring or writing not programmed serial values is only used
when at least one device from current batch of devices in
multiple socket module programmer is completely programmed
and verified without errors.
Note: Serialization can work with control program’s main buffer
only. It means the serialization can be used for device areas
placed inside control program’s main buffer. Device special
areas placed outside the program’s main buffer could not use
serialization feature.
Device / Device options / Serialization /
Incremental mode
55