Dataman 48Pro - Manual (Page 26)

Dataman-40Pro programmer is driven by an easy-to-use
control program with pull-down menu, hot keys and on-line
help. Selecting a device is performed by its class, by
manufacturer or simply by typing a fragment of vendor name
and/or part number.
Standard device-related commands (read, blank check,
program, verify, erase) are enhanced by test functions
(insertion test, signature-byte check), and special functions
(autoincrement).
All known data formats are supported. File formats are
automatically detected and converted during load.
The rich-featured autoincrement function enables to assign
individual serial numbers to each programmed device - or
simply increments a serial number, or the function enables to
read serial numbers or any programmed device identification
signatures from a file.
The software also provides information about the programmed
device. The drawings of all available packages are provided.
The software provides explanation of chip part numbers (the
meaning of prefixes and suffixes of the chips) for each
supported chip.
Various socket converters are available to handle device in
PLCC, SOIC, SSOP, TSOP, TSSOP, TQFP, QFN (MLF) and
other packages.
Advanced design, including protection circuits, original brand
components and careful manufacturing allows us to provide a
three-year warranty on parts and labour for the Dataman-
40Pro (limited 25,000-cycle warranty on ZIF socket).
26