Selftest and calibration, Technical specification, Hardware programmer – Dataman 48Pro User Manual

Page 30: Zif socket, pindriver

H/L/read driver
in programmer

pin of ISP
connector

PU/PD driver
in programmer

Selftest and calibration

If you feel that your programmer does not work properly,
please run the programmer selftest using the Diagnostic POD.
The Diagnostic POD is included with the standard package.
For optimal results, we recommend you run the programmer
selftest and calibration every 6 months. See instructions for
selftest in the Diagnostics menu of PG4UW.

Technical specification

HARDWARE

Programmer

• two D/A converters for VCCP and VPP, controllable rise and

fall time

• VCCP range 0..7V/350mA

• VPP range 0..25V/200mA

• USB 2.0/1.1 compatible interface
• autocalibration

• selftest capability

ZIF socket, pindriver

• 40-pin DIL ZIF (Zero Insertion Force) socket accepts both

300/600 mil devices up to 40-pins

• pindriver: 40 TTL pindrivers, universal GND/VCC/VPP

pindriver