Delta Electronics Ethernet Communication Module DVPEN01-SL - Manual (Page 48)

Ethernet Communication Module DVPEN01-SL
DVP-PLC Application Manual 46
3. Check “Enable Data Exchange” box. Enter IP address of PLC_A “192.168.0.4” in No. 1 Data
Exchange Host IP column. Click on “OK” to complete the setting.
4. After all the settings in PLC_B are completed, compile the ladder diagram in the MPU and download it
to PLC_B. See below for the program design:
END
M1013
K100 K1 K1
K100
K100 K1
M2 M1
M1 SET
M1
TOP K28
TOP
TOP
K29
K14
K13
K0
D100 K7
K100 K1 TOP K1
SET M2
M1 RST
K100 K1
M2
K14 D14
RST M2
RST M2
= D14 K2
= D14 K3
FROM
D100 T D R
M1000
Explanations:
•
The data exchange will be executed every one second.
• Write the communication address of the destination PLC in CR#28, and DVPEN01-SL will
automatically detect by the previous setting that No. 1 IP is “192.168.0.4".