CRU RTX Secure 610-IR - Manual (Page 26)

RTX220 QR - Manual
Page 26
Level Type Description
Error SATA enable device fail Failed to enable the SATA PCI device
Error SATA EDMA mem fail Failed to allocate memory for SATA EDMA
Error SATA remap mem fail Failed to remap SATA memory IO space
Error SATA PRD mem fail Failed ot initialize SATA PRD memory
manager
Error SATA revision ID fail Failed to get SATA revision ID
Error SATA reg fail Failed to set SATA register
Error SATA init fail Core failed to initialize the SATA adapter
Error SATA diag fail SATA Adapter diagnostics failed
Error Mode ID fail SATA Mode ID failed
Error SATA chip count error SATA chip count error
Info SAS port reply error SAS HBA port reply terminated
abnormally
Info SAS unknown port reply
error
SAS frontend reply terminated abnormally
Info FC port reply error FC HBA port reply terminated
abnormally
Info FC unknown port reply
error
FC frontend reply terminated abnormally
EMS Events
Level Type Description
Info Power install Power() is installed
Error Power absent Power() is absent
Info Power restore Power() is restored to work
Error Power fail Power() is not functioning
Warning Power detect PSU signal detection()
Info Fan restore Fan() is restored to work
Error Fan fail Fan() is not functioning
Info Fan install Fan() is installed
Error Fan not present Fan() is not present
Error Fan over speed Fan() is over speed
Warning Thermal level 1 System temperature() is higher
Error Thermal level 2 System overheated()!!!
Error Thermal level 2 shutdown System overheated()!!! The sys-
tem will auto-shutdown immediately.
Error Thermal level 2 CTR
shutdown
The controller will auto shutdown immedi-
ately, reason [ Overheated() ].
Warning Thermal ignore value Unable to update thermal value on
Warning Voltage level 1 System voltage() is higher/lower.
Level Type Description
Error Voltage level 2 System voltages() failed!!!
Error Voltage level 2 shutdown System voltages() failed!!! The
system will autho shutdown immediately.
Error Voltage level 2 CTR
shutdown
The controller will auto shutdown immedi-
ately, reason [ Voltage abnormal()
].
Info UPS OK Successfully detect UPS
Warning UPS fail Failed to detect UPS
Error UPS AC loss AC loss for system detected
Error UPS power low UPS Power Low!!! The system will auto-
shutdown immediately.
Warning SMART T.E.C. Disk S.M.A.R.T. Threshold Exceed
Condition occurred for attribute
Warning SMART fail Disk : Failure to get S.M.A.R.T.
information
Warning RedBoot failover RedBoot failover event occurred
Warning Watchdog shutdown Watchdog timeout shutdown occurred
Warning Watchdog reset Watchdog timeout reset occurred
Info Console Login login from
console> via Console UI
Info Console Logout logout from
console> via Console UI
Info Web Login login from via Web UI
Info Web Logout via Web UI
Info Log clear All event logs are cleared
Warning Send mail fail Failed to send event to
LVM Events
Level Type Description
Info RG create OK RG has been created
Info RG create fail Failed to create RG
Info RG delete RG has been deleted
Info RG rename RG has been renamed as
Info VD create OK VD has been created.
Info VD create fail Failed to create VD
Info VD delete VD has been deleted
Info VD rename The name of VD has been
renamed to
Info VD read only Cache policy of VD has been set
as read only
Info VD write back Cache policy of VD has been set
as write-back