CRU DE75 68-pin U160 - Manual

Rugged, Reliable, Mobile, Secure
TM
1-800-260-9800 www.CRU-DataPort.com
DE75i-SW160 Install Guide
Removable SCSI Wide Ultra160 Drive Enclosure
NOTE: For SCSI Ultra160 operation, the Ultra160 DE75’s require
Ultra160 chassis and cabling.
Figure1: Drive Installation Overview
Drive Installation Overview
Figure 2: Receiving Frame Motherboard
Option Pins
Remote Unit ID Selection: Pins 1-8 of this connector are provided for
remote unit SCSI ID selection through the computer system. Remote ID
selection requires that the unit ID switch located on the inside of the
receiving frame be set to “0” (onboard ID selection is set with a switch
located on the inside of the receiving frame – see
Selecting the Unit
ID Number section.
Remote Activity LED: Pins 11 & 12 provide power for a remote LED
device activity indicator.
Jumpers: Installed at factory - Do Not Remove!