Altera Transceiver Signal Integrity Development Kit, Stratix IV GX Edition - Manual (Page 11)

November 2011 Altera Corporation Transceiver Signal Integrity Development Kit,
Stratix IV GX Edition Reference Manual
2. Board Components
Introduction
This chapter introduces all the important components on the Stratix IV GX transceiver
signal integrity development board.
Figure 2–1 illustrates major component locations
and Table 2–1 lists a brief description of all features of the board.
1
A complete set of schematics, a physical layout database, and GERBER files for the
development board reside in the Stratix IV GX transceiver signal integrity
development kit installation directory.
f
For information about powering up the board and installing the development kit
software, refer to the
Transceiver Signal Integrity Development Kit, Stratix IV GX Edition
Getting Started User Guide .
This chapter consists of the following sections:
■ “Board Overview”
■ “Featured Device: Stratix IV GX” on page 2–6
■ “Configuration, Status, and Setup Elements” on page 2–9
■ “General User Input/Output” on page 2–15
■ “Flash Memory Device” on page 2–18
■ “Components and Interfaces” on page 2–20
■ “Power” on page 2–25