Altera DSP Development Kit, Stratix V Edition - Manual (Page 29)

Chapter 2: Board Components 2–21
Configuration, Status, and Setup Elements
July 2012 Altera Corporation DSP Development Kit, Stratix V Edition
Reference Manual
PCI Express Control DIP Switch
The PCI Express control DIP switch (SW6) can enable or disable different
configurations.
Table 2–16 shows the switch controls and descriptions.
Table 2–17 lists the PCI Express control DIP switch component reference and
manufacturing information.
MAX V Reset Push Button
The MAX V reset push button, MAX_RESETn, is an input to the MAX V CPLD System
Controller. This push button is the default logic reset for the CPLD logic.
Table 2–19 lists the MAX V reset push button component reference and
manufacturing information.
Program Load Push Button
The program load push button, PGM_CONFIG, is an input to the MAX V CPLD System
Controller. The push button forces a reconfiguration of the FPGA from flash memory.
The location in the flash memory is based on the settings of the PGM_LED[2:0] which is
controlled by the program select push button, PGM_SEL.
Table 2–19 lists the program load push button component reference and
manufacturing information.
Table 2–16. PCI Express Control DIP Switch Controls
Switch Schematic Signal Name Description Default
1 PCIE_PRSNT2n_x1
ON : Enable x1 presence detect
OFF : Disable x1 presence detect
ON
2 PCIE_PRSNT2n_x4
ON : Enable x4 presence detect
OFF : Disable x4 presence detect
ON
3 PCIE_PRSNT2n_x8
ON : Enable x8 presence detect
OFF : Disable x8 presence detect
ON
4 — Unused —
Table 2–17. PCI Express Control DIP Switch Component Reference and Manufacturing Information
Board
Reference
Device Description Manufacturer
Manufacturer
Part Number
Manufacturer Website
SW6 Four-Position slide DIP switch C & K Components TDA04H0SB1 www.ck-components.com
Table 2–18. MAX V Reset Push Button Component Reference and Manufacturing Information
Board
Reference
Description Manufacturer
Manufacturer
Part Number
Manufacturer Website
S1 Push button Dawning Precision Co., Ltd. TS-A02SA-2-S100 www.dawning2.com.tw
Table 2–19. Program Load Push Button Component Reference and Manufacturing Information
Board
Reference
Description Manufacturer
Manufacturer
Part Number
Manufacturer Website
S2 Push button Dawning Precision Co., Ltd. TS-A02SA-2-S100 www.dawning2.com.tw