Altera DSP Development Kit, Stratix V Edition - Manual (Page 14)

2–6 Chapter 2: Board Components
MAX V CPLD System Controller
DSP Development Kit, Stratix V Edition July 2012 Altera Corporation
Reference Manual
MAX V CPLD System Controller
The board utilizes the 5M2210ZF256C4 System Controller, an Altera MAX V CPLD,
for the following purposes:
■ FPGA configuration from flash memory
■ Power consumption monitoring
■ Temperature monitoring
■ Fan control
■ Control registers for clocks
■ Control registers for remote system update
HSMC Port A 2.5-V CMOS + LVDS + XCVR 118 1 REFCLK
HSMC Port B 2.5-V CMOS + DQS + XCVR 104 1 REFCLK
Gigabit Ethernet 2.5-V CMOS + LVDS 8 —
On-Board USB-Blaster II
1.5-V CMOS 18 —
3.3-V CMOS 1 —
SDI Video 2.5-V CMOS + XCVR 8 1 REFCLK
QSFP 2.5-V CMOS + XCVR 23 1 REFCLK
Buttons 1.8/2.5-V CMOS 4 1 DEV_CLRn
Switches 1.8-V CMOS 8 —
Character LCD 2.5-V CMOS 11 —
LEDs 1.8/2.5-V CMOS 16 —
Clocks or Oscillators 1.8-V CMOS + LVDS 25 9 REFCLK
Device I/O Total: 713
Table 2–4. Stratix V GS Pin Count and Usage (Part 2 of 2)
Function I/O Standard I/O Count Special Pins