Altera Arria II GX FPGA - Manual (Page 31)

Chapter 6: Board Test System 6–11
Using the Board Test System
February 2011 Altera Corporation Arria II GX FPGA Development Kit User Guide
Write
The Write control writes the SRAM on your board. To update the SRAM contents,
change values in the table and click Write. The application writes the new values to
SRAM and then reads the values back to guarantee that the graphical display
accurately reflects the memory contents.
Random Test
Starts an random data pattern test to flash memory.
Increment Test
Starts an incrementing data pattern test to flash memory.
The DDR3 Tab
The DDR3 tab allows you to read and write the DDR3 memory on your board.
Figure 6–6 shows the DDR3 tab.
Figure 6–6. The DDR3 Tab