Altera Arria II GX FPGA - Manual (Page 18)

4–4 Chapter 4: Development Board Setup
Factory Default Switch Settings
Arria II GX FPGA Development Kit User Guide February 2011 Altera Corporation
For more information about the FPGA board settings, refer to the Arria II GX FPGA
Development Board Reference Manual .
J9 pins 5-6 HSMB DIS
This jumper has the following options:
■ Installing the shunt removes HSMC port B from the JTAG chain.
■ Removing the shunt includes HSMC port B in the JTAG chain.
Installed
J9 pins 7-8 PCIe DIS
This jumper has the following options:
■ Installing the shunt removes the PCIe device from the JTAG chain.
■ Removing the shunt includes the PCIe device in the JTAG chain.
Installed
Table 4–3. JTAG Chain Jumper Settings (Part 2 of 2)
Board
Reference
Board
Label
Function
Default
Shunt Position