Appendix a. frequently asked questions, Where can i get the sd-card controller ip license – Altera Embedded Systems Development Kit, Cyclone III Edition User Manual
Page 75
Altera Corporation
Development Board Version 1.0.
A–1
July 2010
Preliminary
Altera Embedded Systems Development Kit, Cyclone III Edition
Appendix A. Frequently
Asked Questions
This section below explains the frequently asked questions of Nios II
Embedded Development Kit.
Why do I get the error “Can't find valid feature line for core
SD_MMC_SPI_CORE (EC11_0002) in current license; Error: Error
(10003): Can't open encrypted VHDL or Verilog HDL file” when I
try to re-generate the LCD or Application Selector hardware
design?
The 2 example processor systems contain the SD MMC SPI CORE which
is a component that has been provided by a third party vendor, SLS in
encrypted form. To compile this core in your SOPC Builder system, you
will need to license the IP directly from SLS. For details about the SLS SD
Host Controller IP see
If your particular application has no need to access the SD Card then you
do not need to include the SD Card core in your system. Simply uncheck
this core or delete it and re-generate the system. You should now be able
to rebuild the hardware system without error.
Where can I get the SD-Card Controller IP License?
If your design requires access to the on-board SD Card then you can
request an evaluation license or purchase the SD-Card Controller IP,
drivers and FAT File system from SLS.
I have pictures that I would like to display on the PlanetWeb
Digital Photo Frame. How do I do that?
1.
Connect the SD-Card reader provided to your PC via a USB port.
2.
Remove the SD-Card and place in the SD-Card Reader.
3.
Add any .JPEG or .BMP pictures to the images folder on the SD
Card.