DMP Electronics Security Control Receiver SCS-1R - Manual (Page 39)

Digital Monitoring Products SCS-1R Installation Guide
34
PRINTOUT EXPLANATIONS
Printout Explanations
General Description
Note: UL central station applications must use a serial printer listed for Fire Protective Signaling Systems.
The SCS-1R prints out two general types of messages: changes in the system information and messages received
from DMP panels. The message line for system changes is bracketed by double asterisks with the time of
occurrence printed at the far right. Messages from panels always list the account number first followed by the
message and the time of occurrence. The printout below is a typical page from an Activity Log.
ATLAS SECURITY SERVICE, INCORPORATED
Wednesday 5/1/03 * * ACTIVITY LOG * * Page number: 2
* * SECURITY CONTROL SYSTEM NUMBER CHANGED TO: 1. * * 8:01 a.m.
* * LINE: 3 CONFIGURED AS: DD PHONE NUMBER: (214) 555-1212 * * 8:02 a.m.
* * DIALER PANEL NUMBER: 108 ADDED TO LINE: 1 * * 8:04 a.m.
1- 1 Zone: 8 FRONT DOOR - BURG ALARM 8:18 a.m.
1- 1 Zone: 2 BACK DOOR - BURG TROUBLE 8:23 a.m.
1- 1 Zone: 2 BACK DOOR - BURG RESTORE 8:24 a.m.
1- 1 * * AMBUSH * * 8:27 a.m.
1- 1 Area: 1 OFFICE - DISARMED Usr: 007 8:31 a.m.
2 PLANT
3 SHIPPING
1- 1 Zone: 010 FRONT DOOR - BYP Usr: 015 8:33 a.m.
1- 1 Usr: 009 added to panel Usr: 002 8:33 a.m.
1- 1 Permanent schedule for Tuesday Area: 1 8:35 a.m.
Open: 8:00 a.m. Close: 5:30 p.m. Usr: 005
1- 1 Door access Dr: 001 Usr: 021 8:36 a.m.
1- 1 WARNING: Low standby battery 8:38 a.m.
1- 1 Zone: 37 SMOKE DET. - FIRE ALARM 8:40 a.m.
System Messages
System messages are provided on the Activity Log printer to provide a permanent record of changes made to the
system information. The operator making the change is determined by referring to the last sign on.
Panel Messages
Messages from panels are sent to the SCS-1R advising of various changes in the panel status. The messages print
and/or display on the LCD.
Alarm, Trouble, and Restore
These messages are all formatted the same. Alarm and Trouble messages print to the Activity Log and display on
the LCD for acknowledgment.
Fire and Supervisory restorals display on the LCD for acknowledgment and printed to the Activity Log while other
restore messages print to the Activity Log only.
Ambush
The Ambush message prints and displays on the LCD for acknowledgment.
Opening and Closing
Openings and Closings reports list the areas that are armed or disarmed and the user name making the change.
These messages can be from 1 to 8 consecutive lines and print to the Activity Log only.
Bypass and Reset
This message prints in a one line format listing the zone number, zone name, and user name making the change.
The message prints on the Activity Log only.
Schedule Changes
This prints in a 2-line format listing the type of schedule, day of the week, opening and closing time, and the user
name making the change. This message prints on the Activity Log only.
Door Access
This message lists the user name accessing the door strike relay and the door number that is being accessed. The
door number matches the keypad address operated by the user. This message prints on the Activity Log only.