Pilz PIT m3.2p machine tools pictogram - Manual (Page 51)

Operation
Operating Manual PIT m3.2p
1003176­EN­02 51
7.5 Troubleshooting
If an error occurs on the operating mode selector switch, the last operating mode to be set
will be retained.
Fault Possible cause Remedy
Unable to switch the
operating mode Multiple operation of but­
tons Make sure that only one button is
operated
Operating time too long or
too short Make sure that the period of opera­
tion is observed.
Transponder key is not de­
tected Make sure that the transponder key
is connected to the operating mode
selector switch or inserted correctly.
No valid authorisation Make sure that you use a transpon­
der key that has the required au­
thorisation