Removing an electronic module, Changing an electronic module during operation, 5installation – Pilz PSSu E S 2AO I User Manual
Page 33: 3 inserting and removing an electronic module, 2 removing an electronic module, 3 changing an electronic module during operation
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-5
5.3
Inserting and removing an electronic module
5
Installation
5.3.2
Removing an electronic module
Removing an electronic module
5-
][Elektronikmodul ziehen
Procedure:
Press the locking mechanisms [1] together simultaneously.
Pull out the electronic module [2].
Schematic representation:
5.3.3
Changing an electronic module during operation
Changing an electronic module during operation
5-
][Montage BA Hot Swapping ST-E/A-Modul
The electronic module can be hot swapped. The configuration data is re-
tained when a module is swapped.
Effects:
System environment A:
– An ST communication error may occur.
System environment B:
– While the module is disconnected, the substitute values for the
module's signals/values are used (Valid Bits = FALSE).
– Once the module is reconnected, it is reactivated automatically.
[1]
[2]
[1]