Pilz PSSu E S PD-D - Manual (Page 25)

Technical Details
Operating Manual PSSu E S PD-D
21975-EN-04
25
Technical Details
General 312197
Approvals CE, cULus Listed
Application area Standard
Module's device code 000Ah
Application in system environment A
From ST firmware version, other head modules 16
From ST firmware version PSSu H S PN 1
Application in system environment B
From ST firmware version, head modules 1.8.0
Electrical data 312197
Internal supply voltage (module supply)
Module's current consumption 60 mA
Module's power consumption 0,30 W
Supply voltage range of module supply 4,8 - 5,4 V
Periphery's supply voltage (periphery supply)
Voltage range 16,8 - 30,0 V
Module's current consumption with no load 30 mA
Module's power consumption with no load 0,72 W
Max. power dissipation of module 1,50 W
Semiconductor outputs 312197
Number of outputs for periphery supply 4
Voltage 24 V DC
Max. output current at rated voltage 1,50 A
Typ. threshold value for overload 8 A
Potential isolation between output and voltage for the
internal module bus
Yes
Short circuit-proof Yes
Permitted loads Inductive, capacitive, resistive
Environmental data 312197
Climatic suitability EN 60068-2-1, EN 60068-2-14, EN 60068-2-2, EN
60068-2-30, EN 60068-2-78
Ambient temperature
In accordance with the standard EN 60068-2-14
Temperature range 0 - 60 °C
Storage temperature
In accordance with the standard EN 60068-2-1/-2
Temperature range -25 - 70 °C
Climatic suitability
In accordance with the standard EN 60068-2-30, EN 60068-2-78
Humidity 93 % r. h. at 40 °C
Condensation Not permitted
EMC EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN
61000-4-5, EN 61000-4-6, EN 61131-2
8