Pilz PSSu E F INC - Manual (Page 37)

Technical Details
Operating Manual PSSu E F INC(­T)
1001454­EN­07 37
Incremental encoder input 312280 314280
Phase offset between differential
signals A and B
90 deg 90 deg
Phase offset tolerance 30 deg 30 deg
Maximum cutoff frequency 5,0 MHz 5,0 MHz
Time constant of input filter on
LATCH signal
50 µs 50 µs
Time constant of input filter on
GATE signal
50 µs 50 µs
Time constant of input filter on
STATUS signal
50 µs 50 µs
Typ. processing time 0,1 ms 0,1 ms
Potential isolation between input/
output and periphery supply
Yes Yes
Potential isolation between input/
output and voltage for the internal
module bus
Yes Yes
Environmental data 312280 314280
Climatic suitability EN 60068­2­1, EN 60068­2­14, EN
60068­2­2, EN 60068­2­30, EN
60068­2­78 EN 60068­2­1, EN 60068­2­14, EN
60068­2­2, EN 60068­2­30, EN
60068­2­78
Ambient temperature
In accordance with the standard EN 60068­2­14 EN 60068­2­14
Temperature range 0 ­ 60 °C ­40 ­ 70 °C
Storage temperature
In accordance with the standard EN 60068­2­1/­2 EN 60068­2­1/­2
Temperature range ­25 ­ 70 °C ­40 ­ 70 °C
Climatic suitability
In accordance with the standard EN 60068­2­30, EN 60068­2­78 EN 60068­2­30, EN 60068­2­78
Humidity 93 % r. h. at 40 °C 93 % r. h. at 40 °C
Condensation during operation Not permitted Short­term
EMC EN 61000­4­2, EN 61000­4­3, EN
61000­4­4, EN 61000­4­5, EN
61000­4­6, EN 61000­6­2, EN
61000­6­4 EN 61000­4­2, EN 61000­4­3, EN
61000­4­4, EN 61000­4­5, EN
61000­4­6, EN 61000­6­2, EN
61000­6­4
Vibration
In accordance with the standard EN 60068­2­6 EN 60068­2­6
Frequency 10,0 ­ 150,0 Hz 10,0 ­ 1000,0 Hz
Amplitude 0,35 mm 0,35 mm
Acceleration 1g 5g
Broadband noise
In accordance with the standard – EN 60068­2­64
Frequency – 5 ­ 500 Hz
Acceleration – 1,9grms