Pilz PSSu E F INC - Manual (Page 11)

Safety
Operating Manual PSSu E F INC(­T)
1001454­EN­07 11
– Offset
} If more than two counters are used, each individual counter module of a PSSu system
must supply diverse input values to the other counter modules of the PSSu system.
} Safe standstill monitoring must be carried out by feasibility with a safe travel command
in the function block.
} Test the safety functions when commissioning or recommissioning.
Intended use includes making the electrical installation EMC­compliant. Please refer to the
guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use
in an industrial environment. It is not suitable for use in a domestic environment, as this can
lead to interference.
The following is deemed improper use in particular:
} Any component, technical or electrical modification to the module
} Use of the module outside the areas described in this manual
} Any use of the module that is not in accordance with the technical details.
INFORMATION
The module is supported by PAS4000 from Version 1.1.1. We recommend
that you always use the latest version (download from www.pilz.de).
The PSSu E F INC module may be used in conjunction with the following base modules:
} PSSu BP 2/16S
} PSSu BP 2/16C
} PSSu BP­C 2/16S
} PSSu BP­C 2/16C
The module PSSu E F INC­T may be used in conjunction with the following base modules:
} PSSu BP 2/16S­T
} PSSu BP 2/16C­T
} PSSu BP­C 2/16S­T
} PSSu BP­C 2/16C­T
3.2 Safety regulations
3.2.1 Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is someone who, because of their training, experience and current pro­
fessional activity, has the specialist knowledge required to test, assess and operate the
work equipment, devices, systems, plant and machinery in accordance with the general
standards and guidelines for safety technology.
It is the company’s responsibility only to employ personnel who: