Pilz PNOZ m EF 2MM - Manual (Page 13)

Function description
Operating Manual PNOZ m EF 2MM
1003107­EN­01 13
4.5 Proximity switches
} The following proximity switches can be used:
– pnp
– npn
} The proximity switches must be fitted so that at least one is always activated. In other
words, the proximity switches must be fitted so that the recorded signals always over­
lap.
} The cable used to connect the proximity switches must be shielded (see connection
diagrams in the chapter entitled "EMC­compliant wiring").
} A DC voltage in the range of 0 ­ 30 V can be monitored via Track S. It should be used
to monitor the supply voltage of the proximity switches.
Proximity switch assembly:
Ini 1 Ini 2