1 rotary knob, 1 function, 2 pull out and retract the knob – Pilz PNOZ m B0 User Manual

Page 27: 3 rotate and press the knob, Rotary knob, Function, Pull out and retract the knob, Rotate and press the knob

Operation

Operating Manual PNOZ m B0
1002660EN03

You can switch between the menu levels by pressing or rotating the knob.

7.2.1

Rotary knob

7.2.1.1

Function

The menu settings are made on the unit's display via a rotary knob. You have the option to
make the settings on the knob by hand or with a screwdriver. If you make the settings with
a screwdriver, the knob can remain within the unit.

7.2.1.2

Pull out and retract the knob

The rotary knob:

}

(A) should be pulled out until it clicks into position

}

(B) then released and retracted back into the unit:

–

Press the latch on the side of the rotary knob (1) towards the centre of the knob.
This releases the rotary knob.

–

Press the knob downwards (2) while keeping the latch held down.

7.2.1.3

Rotate and press the knob

The settings are made via the rotary knob, as follows:

Press the knob

}

Confirm selection/setting

}

Switch to menu

Rotate knob

}

Select menu level